|
Author | Message |
---|
kyosho117
Posts : 24 Join date : 2012-04-16 Age : 34 Location : Macomb
| Subject: Rustler Mon Apr 23, 2012 1:32 pm | |
| I am now running an 86 35 gearing, i wanted to know would running the 76 31 gearing make a bigger difference in speeds |
|
| |
jeremy_mccoy_warren
Posts : 46 Join date : 2012-04-16 Age : 37 Location : Warren
| Subject: Re: Rustler Mon Apr 23, 2012 1:52 pm | |
| Lower spur higher pinion = max top speed
Higher spur lower pinion = more acceleration
So if ur looking for top end run the 76/34
|
|
| |
jeremy_mccoy_warren
Posts : 46 Join date : 2012-04-16 Age : 37 Location : Warren
| Subject: Re: Rustler Mon Apr 23, 2012 1:55 pm | |
| I would not run that gear ratio w/o a esc fan and motor fan
With more speed comes more heat so be careful |
|
| |
kyosho117
Posts : 24 Join date : 2012-04-16 Age : 34 Location : Macomb
| Subject: Re: Rustler Mon Apr 23, 2012 2:30 pm | |
| yeah i already run a fan on the esc as a precaution.. i will probably try that gearing |
|
| |
jeremy_mccoy_warren
Posts : 46 Join date : 2012-04-16 Age : 37 Location : Warren
| Subject: Re: Rustler Mon Apr 23, 2012 2:35 pm | |
| I run a 76 34 on my pede n its retarded fast lol..eventually I wanna make it a 1 to 1 ratio but idk if ill ever get around to it |
|
| |
kyosho117
Posts : 24 Join date : 2012-04-16 Age : 34 Location : Macomb
| Subject: Re: Rustler Tue Apr 24, 2012 1:21 pm | |
| Lol yeah i bet it is cause my gearing seems fast.. what do you mean by 1 to 1 ratio? |
|
| |
jeremy_mccoy_warren
Posts : 46 Join date : 2012-04-16 Age : 37 Location : Warren
| Subject: Re: Rustler Tue Apr 24, 2012 1:34 pm | |
| Like if u ran a 36/36 I seen guys on youtube run it and that's how they get the 100mph speeds among other things lol |
|
| |
kyosho117
Posts : 24 Join date : 2012-04-16 Age : 34 Location : Macomb
| Subject: Re: Rustler Tue Apr 24, 2012 1:41 pm | |
| ahh i see .. 100 mph is crazy!! i thought about trying it but its too much money |
|
| |
randaddy
Posts : 73 Join date : 2012-04-28
| Subject: Re: Rustler Sat Apr 28, 2012 11:52 pm | |
| mine hits 80 with the 76 34 (castle gear ) setup. have room! rustys are tall so they soak up bumps kinda well but under heavy accel they lift and tumble easy. integy makes a kit that makes the rusty bullit proof. it's my basher so i beat the snot outta it. i had it going in the 70 mph range and collided with my friend kyles slash head on. it's been on the shelf since. if this place gets going ill put it back together and get some speed goin again. |
|
| |
indy34096
Posts : 53 Join date : 2012-04-29 Age : 27 Location : Macomb Township
| Subject: Re: Rustler Mon Apr 30, 2012 5:27 pm | |
| A 1:1 ratio I could only imagine how hard that would be on the motor. You'd pretty much need to push it to get it going because that's just so much load on the motor.
Not to mention how much you'd need to butcher the tranny case and the HEAT.... |
|
| |
jeremy_mccoy_warren
Posts : 46 Join date : 2012-04-16 Age : 37 Location : Warren
| Subject: Re: Rustler Mon Apr 30, 2012 5:39 pm | |
| They do it tho...or atleast pretty darn close...maybe a few teeth difference |
|
| |
Sponsored content
| Subject: Re: Rustler | |
| |
|
| |
|