|
| Author | Message |
|---|
kyosho117
Posts : 24
Join date : 2012-04-16
Age : 34
Location : Macomb
 | | Subject: Mamba Max Pro Tue Apr 24, 2012 1:27 pm | |
| Who has the pro and has some good race setups for them running non sensor motors |
|
 | |
perks081
Posts : 55
Join date : 2012-04-15
Age : 43
Location : shelby twp
| | Subject: Re: Mamba Max Pro Fri May 04, 2012 3:41 pm | |
| i just picked up a mamba pro and still messing around with it. had to gear it down to keep it on the track at larrys |
|
| | |
kyosho117
Posts : 24
Join date : 2012-04-16
Age : 34
Location : Macomb
| | Subject: Re: Mamba Max Pro Fri May 04, 2012 10:58 pm | |
| yeah i am running an 82 spur 20 pinion |
|
| | |
perks081
Posts : 55
Join date : 2012-04-15
Age : 43
Location : shelby twp
| | Subject: Re: Mamba Max Pro Sun May 06, 2012 11:16 pm | |
| WHAT KIND OF SPEED AT U GETTING WITH THAT |
|
| | |
kyosho117
Posts : 24
Join date : 2012-04-16
Age : 34
Location : Macomb
| | Subject: Re: Mamba Max Pro Sun May 06, 2012 11:45 pm | |
| Its way more than i need at larry's so most of the time i turn it down on my radio. |
|
| | |
perks081
Posts : 55
Join date : 2012-04-15
Age : 43
Location : shelby twp
| | Subject: Re: Mamba Max Pro Mon May 07, 2012 5:03 am | |
| I HEAR YOU THERE U DONT EVEN GET TO GO FULL THROTTLE AND U ARE ABOUT READY TO FLY OFF THE TRACK IT SEEMS, IVE ALSO JUST ABOUT WENT THRU A SET OF TIRE PLAYING OUT ON TH ROAD WITH IT |
|
| | |
kyosho117
Posts : 24
Join date : 2012-04-16
Age : 34
Location : Macomb
| | Subject: Re: Mamba Max Pro Mon May 07, 2012 11:28 am | |
| Yeah But now i am looking to get a different motor for my truck, i am realizing that its just too much if i strip idler gear in two visits at the track. probably going to look at getting 10.5 from someone |
|
| | |
tntpoof
Posts : 73
Join date : 2012-04-16
Location : Trenton
| | Subject: Re: Mamba Max Pro Tue May 08, 2012 3:31 pm | |
| ok ur gear is 1st problem.. 20/82 is way to BIG.. try a 16/90+..then u can use ur rpms..as for setups with a NON sensored motor. they will not help..as 98% of the setting in a pro rely on sensor wire..if u wanta try another motor get someone with a good 17.5 and run it then u can adjust all the pros setting. I know people that run 40 degrees timing on there motor.. if you still want a faster motor try a speedgems 15.5 u can get them for $35 off ebay.. |
|
| | |
kyosho117
Posts : 24
Join date : 2012-04-16
Age : 34
Location : Macomb
| | Subject: Re: Mamba Max Pro Tue May 08, 2012 10:43 pm | |
| Alright thanks i think i will try it. some today showed me how to you some of the other settings like punch control so all the torque is not thrown at the gears all at once.. i am also running a short course truck ppl run a 17.5 in the stadium trucks idk about sc though seems like its not a lot. |
|
| | |
perks081
Posts : 55
Join date : 2012-04-15
Age : 43
Location : shelby twp
| | Subject: Re: Mamba Max Pro Wed May 09, 2012 11:19 pm | |
| do u have a feild program card thats way u can change it while u are out runner to get it set where u want |
|
| | |
kyosho117
Posts : 24
Join date : 2012-04-16
Age : 34
Location : Macomb
| | Subject: Re: Mamba Max Pro Thu May 10, 2012 1:54 pm | |
| yeah i have the card but i found that the card isnt as good as using the link to the computer... |
|
| | |
tntpoof
Posts : 73
Join date : 2012-04-16
Location : Trenton
| | Subject: Re: Mamba Max Pro Thu May 10, 2012 2:27 pm | |
| try a 17.5 or 13.5 or this..http://www.rcboyz.com/product.php?productid=7071
or get some metal gears in that trans.. They do make a set.just have to find them.. also set ur slipper clutch different on ur trans also put alittle slip in the dif itself.. |
|
| | |
bashdaslash
Posts : 118
Join date : 2012-04-15
Age : 27
Location : Rochester Hills
| | Subject: Re: Mamba Max Pro Fri May 25, 2012 11:24 pm | |
| is just got the mmp sct 2400kv system with the 550 can motor and love it. |
|
| | |
Sponsored content
| | Subject: Re: Mamba Max Pro | |
| |
|
| | |
|
